Schrader Valves

One irrefutable fact about refrigeration systems is that sooner or later, they all need at least one access port.  Testing, evacuating, charging - they all require access to the refrigerant circuit.  That is where the lowly Schrader valve comes in.  If you are changing out the compressor (or any other component) in a small refrigerator, you are going to want to solder a couple of these fellows in place (one on the high pressure side, one on the low).

Note:  Use the valve cap (supplied) to remove and replace the valve core during soldering.

Schrader Valve - 1/4" OD stem
Model: VALVES:096-0034
Qty: 0

$6.95

Schrader Valve - 3/8" OD stem
Model: VALVES:096-0035
Qty: 3

$4.95

Schrader Valve - 1/4" Flare x 1/4" OD tee
Model: VALVES:096-0036
Qty: 0

$7.95

Schrader Valve - 1/4" Flare x 3/8" OD tee
Model: VALVES:096-0037
Qty: 0

$7.95

Displaying 1 to 4 (of 4 products)
  • (current)1