Complete Additional Parts List
| Item No. | Part No. |
Qty |
Description |
| 1 | --- | tbd | Acetone or Similar Cleaning Solvent |
| 2 | --- | 1 | Ball Valve (for Inlet Through Hull Fitting) |
| 3 | --- | 4 each | Bolts,
Washers & Nuts - 1/4" diameter (to Mount Condensing Unit) |
| 4 | --- | 1 | Cotton Rag |
| 5 | --- | 1 | DC Breaker - 15 amp (Labeled "Refrigeration") |
| 6 | --- | tbd |
Electrical Supply Wiring & Electrical Terminals (Select Wire Gauge Appropriate for Distance & Terminals Appropriate for Wire Gauge) |
| 7 | 055-0040 | tbd | Foam
Tube or Adhesive Tape Insulation (to Insulate Suction Line) |
| 8 | --- | tbd | Heat Shrink Tubing |
| 9 | --- | 4 | Hose
Barb Fitting - 3/8" OD (for Water Strainer & Through Hull Fittings) |
| 10 | coming soon 055-0030 | 8 | Mini
SS Hose Clamp - 1/4" Band Width (to Fit Water Hose) |
| 11 | --- | tbd | Nylon Reinforced Vinyl Water Hose (or Similar) - 3/8" ID |
| 12 | --- | tbd | Oil (for Flared Connection Seals) |
| 13 | --- | 1 | Raw Water Strainer - 3/8" |
| 14 | --- | 2 lbs |
Refrigerant - R134a (and Refrigerant Cap Tap Adapter if Using Disposable Cans) |
| 15 | --- | tbd | Safety
Duplex Tinned Cable - 14/2 (for Water Pump) |
| 16 | --- | tbd | Spray Foam or Plumbers Putty |
| 17 | --- | 2 | SS
Screw - #8 x 1/2" (to Mount Thermostat Bracket) |
| 18 | --- | 2 | Through Hull Fitting |
| 19 | --- | 8 | Wood
or Sheet Metal Screws (to Mount Holdover Plate) |
| 20 | --- | 4 | Wood
or Sheet Metal Screws (to Mount Water Pump) |
This list includes all of the additional parts required to build your refrigeration system. The parts that have a part number are available through Rparts.
Complete Required Tools List
| Item No. | Part No. |
Description |
| 1 | --- | #11 X-acto™ Blade and Handle |
| 2 | --- | Assorted Open End and Adjustable Open End Wrenches |
| 3 | 079-0880 | Bubble Solution Liquid Leak Detector |
| 4 | --- | Electric Drill and Assorted Drill Bits |
| 5 | 079-0703 | Flaring Tool and Tubing Vise |
| 6 | --- | Hammer |
| 7 | --- | Heat Gun or Matches |
| 8 | --- | Medium Phillips Screwdriver |
| 9 | --- | Nitrogen or CO2 Tank with Regulator |
| 10 | --- | Pencil and Marking Pen |
| 11 | --- | Pliers |
| 12 | --- | Propane Torch |
| 13 | 079-0075 | Refrigeration Service Manifold Gauge Set |
| 14 | --- | Scale with 1 oz. accuracy |
| 15 | coming soon 079-0710 | Service Wrench (1/4" Square Opening) |
| 16 | --- | Tape Measure |
| 17 | 079-0650 | Tubing Cutter |
| 18 | 079-0250 | Vacuum Pump |
| 19 | --- | Wire Crimping Pliers |
| 20 | --- | Wire Cutter and Stripper |
This list includes all of the tools required to build your refrigeration system. The tools that have a part number are available through Rparts.