Condensers & Evaporators
 

Refrigeration Parts Solution supplies both air-cooled and water-cooled condensers and evaporators.  Most coils can be used as either an evaporator or condenser.  If you are designing your own system and are unsure of how to size these parts, we strongly suggest that you purchase one of our technical books for guidance.  No matter what system you own or wish to build, an RParts heat exchanger will provide the performance you need.  Replacing one on an existing system?  Our air-cooled coils, shell-in-tube and tube-in-tube units are all guaranteed to meet or exceed the quality of the original equipment. In many cases your RParts component is actually manufactured for us by the very same company that made your original OEM part.  You'll get the same part at a fraction of the cost!
 

Forced Air
Condenser/Evaporator
 
RParts stocks 3 sizes of air cooled coils suitable for use as both condensers and evaporators. They are constructed of copper tube and aluminum fins for easy installation and high performance. Coil 012-1001 can be used with our fan shroud (055-0181) and DC fans (071-0100 or 071-0200) to build a compact, efficient air cooled condenser for Danfoss compressors.  For capacity guidance and photo click on the part number.

Part No. Price Size*
HxWxT		 Rows Connection Qty
Avail.		  
012-1001 $75.95 7"x9"x1.75" 2 3/8" ID  tube x 1/4" ID tube 46
Quantity:
055-0181 $45.25  012-1001 Fan Shroud NA NA 16
Quantity:
012-0850 - 8"x8"x.3.50" 4 3/8" ID tube x
1/2" OD tube		 unknown DISCONTINUED
012-0900 $239.95
$132.00		 8"x16"x3.50" 4 5/8" OD tube x 1/2" flare 2
Quantity:

* Dimensions are of the finned coil area only.  Overall width is larger.

Roll-Bond
Evaporators
 
Roll-bond evaporators are the world-wide standard for building efficient, low-cost refrigerator and freezer systems.  Ours may be purchased pre-bent into convenient "boxes", flat or custom-bent to your requirements.  Pre-bent "boxes" are constructed with a bottom end and can be mounted vertically or horizontally.

All RParts roll-bond evaporators are constructed of powder-coated aluminum and supplied with the  capillary tube and copper suction line (1/4") pre-installed.  All standard capillary tubes are 98" in length and ID of .022".  We highly recommend purchasing a capillary tube strainer as the capillary tube is highly susceptible to contamination and clogging.  Clogged capillary tubes will not be warranted.

Part No. Price Size   Qty
Avail.		  
019-0150 $153.55 12.50"x5.25"x11.50" Pre-Bent Box 1
Quantity:
019-0350 $160.70 15.50"x5.63"x13.75"
 temporarily discontinued		 Pre-Bend Box out of stock
Quantity:
019-0100 $99.50 33.25" L x 11.38" Flat Plate 15
Quantity:
019-0200 $99.50

43.25" L x 11.6"

Flat Plate 15
Quantity:
019-0300 $99.50 39.38" L x 13.63"

temporarily discontinued

 (Alternative is 019-0301)

 Flat Plate out of stock
Quantity:
019-0301 $99.50 44.13" L x 12.75" Flat Plate 14
Quantity:
019-0050 $89.50 23.00" L x 8.25" Flat Plate 11
Quantity:
Water Cooled
Tube-In-Shell Condensers
 
RParts tube-in-shell condensers pack a lot of cooling power into a small package.  These 2" diameter units are now available in three lengths and are built specifically for marine use.  All condensers are made of 90-10 copper-nickel, include a zinc anode for double protection against corrosion, and have a condenser grounding stud for a bonding wire.  Life expectancy of the zinc anode depends on the amount and intensity of stray electrical currents in the area and should be inspected every 6 months.   

The 012-0750 condenser is manufactured by the same company that made the part for a leading refrigeration system manufacturer.  It has an unique feature as the rubber end caps can be removed to accommodate cleaning and demineralization of the water passages.  Mineral deposit build up will make heat exchange with the passing water more difficult.  How often it should be cleaned is dependent on the temperature and mineral content of the cooling water in addition to the type of cooling (i.e. refrigerator, freezer or air conditioning application).  The condenser comes complete with zinc anode, rubber end caps, and rubber end cap clamps. 

For capacity guidance, photos and additional information click on the part number.
Part No. Price Size
Length		 Connection
Ref x Water		 Qty
Avail.		  
012-0600 $278.75 10.5" 3/8" Sweat x
3/4" NPT		 2
Quantity:
012-0400 $319.75 16.5" 3/8" Sweat x
3/4" NPT		 4
Quantity:
012-0750 $478.45 15.25" 3/8" & 1/2" Sweat (Ref)  x 3/4"(Water) 5
Quantity:

 

Parts & Accessories for Tube-In-Shell Condensers
Part No. Price      
012-0550 $9.85 Spare Zinc Anode
(for 012-0600 & 012-0400)		 15
Quantity:
012-0560 $8.85 Spare Zinc Anode
(for 012-0750)		 5
Quantity:
055-0010 $16.85/pr Mounting Brackets
(for all Tube-In-Shell Condensers)		 13
Quantity:
012-0701 $37.30ea Rubber End Cap
(for 012-0750)		 21
Quantity:
055-0007 $2.50ea Rubber End Cap Clamp
(for 012-0750)		 18
Quantity:
Water Cooled
Coaxial Condenser/Evaporators
 
These coaxial heat exchangers are suitable for use as condensers or "chiller" evaporators.  The refrigerant circuit is run through the outer tube and the water (sea water or glycol) is run through the  90-10 copper-nickel inner tube.  012-1005 is used with a Danfoss Compressor in one of our water-cooled DIY kits.  For capacity guidance, photos and additional information click on the part number.
Part No. Price Size*
OD x H		 Connection
Ref x Water		 Qty
Avail.		  
012-1005 $237.85 7.75" x 3.00" 1/4" x 3/8" Sweat 7
Quantity:
012-0027 $204.30 6.25" x 3.50" 3/8" x 5/8" Sweat 4
Quantity:
012-0025 $210.85 6.25" x 4.25" 3/8" x 5/8" Sweat 3
Quantity:
012-0022 $302.70 10.25" x 5.31" 3/8" x 7/8" Sweat 3
Quantity:
012-0023 $316.85 10.25" x 6.44" 3/8" x 7/8" Sweat 4
Quantity:
012-0024 $381.60 11.50" x 7.56" 1/2" x 7/8" Sweat 2
Quantity:

*The OD given does not include the straight connection extensions.

 

Home Page