Refrigeration Service Gauge Sets

 

R-134a, R-404a, R-507 Service Manifold w/Hoses


Ritchie Yellow Jacket has been a service industry standard for many years.  This set features a forged solid brass body and "flutterless" silicone dampened gauges.  The color coded hoses are compatible with all CFC, HCFC and HFC refrigerants and rated at 500 psi working pressure.  Gauges are printed with HFC refrigerant scale but can also be used with R-12, R-22 and other CFC and HCFC refrigerants.  All connections are 1/4" flare.  (See adapters below to use the gauges with other fittings)
 

Gauge Set w/ 36" Hoses
079-0075 $89.95
Qty Avail. - 3

Quantity:
Gauge Set w /60" Hoses
079-0076 $99.95

Qty Avail. - 3

Quantity:

 

Replacement Charging Hoses


Charging hoses are built for all-weather flexibility and dependability.  However, it is recommended that you replace them every five years due to the wear and tear of the hose.  Our color coded hoses are compatible with all CFC, HCFC, and HFC refrigerants and are rated at 500 psi working pressure.  The brass connections are 1/4" flare, straight and angled (45 deg).  The adjustable valve core depressor on the system side connection makes accessing out-of-tolerance Schrader valves a snap.  Hoses are available in 36 and 60 inch lengths.  They are a direct replacement for the gauge sets above (079-0075 and 079-0076).
 

 

 

RYB 36" Hoses - 1/4" Flare Connections
079-0095 $27.95
Qty Avail. - 1

Quantity:
RYB 60" Hoses - 1/4" Flare Connections.
079-0096 $38.95

Qty Avail. - 2

Quantity:

 

Replacement Gaskets for 1/4" Flare Hoses


Every professional refrigeration serviceman knows that leaking hoses can cause no end of headaches.  Stop spending hours searching for system leaks that don't exist, sucking air into the system during evacuation and leaking refrigerate during charging.  Just pull out the old chewed-up seals and push these new ones into place.  These seals are compatible with all standard 1/4" flare hose connections including our manifold sets # 079-0075 and 079-0076, above.

Each package contains three seals.
 

079-0226 $3.00

Qty Avail. - 14

Quantity:

 

"Automotive"  R-134a Service Manifold w/Hoses


This service manifold is uses "automotive" style R-134a connectors.  The red (high-side) hose connects to a 16mm auto snap release fitting (see inset).  The blue (low side) hose connects to a 13mm fitting. The yellow (center) hose connects to the 1/2" male  "Acme" thread found on the 12 ounce R-134a automotive can tap valves. 

The 60" hoses and end fittings incorporate multiple shutoff valve to prevent loss of refrigerant and eliminate frostbite hazard.  The valve body is cast brass and with large high accuracy gauges.

079-0072 $265.25

Qty Avail. - 1

Quantity:

 

1/4" Flare to Acme Charge Port Adapters

Prior to 1992, all small refrigeration and A/C charge ports were standardized to 1/4" male flares.  With the introduction in new refrigerants, some systems (particularly automotive R-134a) have switched to an "Acme" thread.  The fittings below give you the flexibility to interchange 1/4" flare and Acme charge cylinders, gauge sets and system charge ports.
 

Part No. Price Description Qty
Avail.
 
024-0100 $28.30 Acme Female Thumb Screw to 1/4" Male Flare 8
Quantity:
024-0101 $15.95 1/4" Female Flare to Acme Male 3
Quantity:


 

Automotive to 1/4" Flare to Charge Port Adapters

Use these handy adapters to adapt standard 1/4" flare hoses and gauge sets to new "automotive style" R-134a compressor charge ports.  The 13mm "low-side" adapter is used on the suction side of the compressor while the 16mm "high-side" connects to the discharge side of the system.  Use adapter #024-0100 (above) to adapt the 1/4" hose set to the "Acme" threads that are used on the "automotive style" refrigerant cans.

Part No. Price Description Qty
Avail.
 
024-0102 $36.00 13mm Low-Side Auto-Flare Adapter 3
Quantity:
024-0103 $36.65 16mm High-Side Auto-Flare Adapter 1
Quantity:


 

R-134a Refrigerant Can Tap

These can taps attach to 12oz "automotive" style cans of refrigerant to provide a safe, controllable flow.  Select the right one to match your can.  #079-0211 is for R-12 cans designed for use with a clip-on valve.  The discharge port is 1/4 male flare.  To adapt this port to a 1/2" Acme hose - use adapter #024-0101 (above)

#079-0210 is designed to screw directly on to  R-134a cans. The thread on the discharge port is standard automotive R-134a "Acme".  To adapt this port to 1/4" flare hoses, use adapter #024-0100 (above).
 

Part No. Price Description Qty
Avail.
 
079-0210 $16.80 R-134a Tap - 1/2" Male Acme Thread 5
Quantity:
079-0211 $18.20 R-12 Can Tap - 1/4" Male Flare out of stock
Quantity:



 

Home Page